MÄDLERMÄDLER· Couplings, Friction Clutches, Safety Couplings
One-piece clamp coupling MAS both sides bore 14mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9
Manufacturer part no. 60061400
$67.30≈ 58.45 €
In stock — 25 unitslead time 14 d
Estimated landed cost
| Item | €58.45 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €14.69 |
| Total delivered | €88.14 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 272 g |
Other characteristics
| Bore diameter | 14 mm |
| Max misalignment angle | 0 ° |
| Max misalignment axial | 0 mm |
| Max misalignment radial | 0 mm |
| Max outer diameter over screw head | 39.1 mm |
| Max speed | 4 U/min |
| Max torque | 160 Nm |
| Outer diameter | 34 mm |
| Temperature max. | 175 °C |
| Temperature min. | -40 °C |
| Tightening torque fastening screws | 9.5 Nm |
| Total length | 50 mm |
| Coupling type | Rigid one-piece stlye |
Description
Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 – 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft.
Similar products
MÄDLERIn stock
Disc spring set S for safety clutch CM size 25 Nr.61262500 consisting of 6 springs strength S
€77.62$89.38
View at seller ↗
MÄDLERIn stock
Face spanner for two-hole round nuts matching with den Sliding hub ROBA n 612 400 00 and 612 420 00
€147.36$169.68
View at seller ↗
