MÄDLERMÄDLER· Mechanics & transmission
Manufacturer part no. 60083500
Listed by MÄDLER at €161.31. Delivered to France, including shipping, VAT and any customs duty, it comes to about €211.57. Prices last checked on 2026-10-04.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €161.31 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €35.26 |
| Total delivered | €211.57 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Newall 600-83500 SPC Encoder Interface Module 60083500
New, open box · sold by amzglass · ships from US
Imported from outside the EU — duties and VAT included in the delivered cost; customs formalities and delays are not
€267.25
billed $299.99
€265.69 delivered
NSNPALL 600-83500 SPC INTERFACE MODULE NSMP
New, open box · sold by industrial_blueline_special · ships from US
Imported from outside the EU — duties and VAT included in the delivered cost; customs formalities and delays are not
€311.80
billed $350.00
€479.32 delivered
Third-party listings on eBay, matched to this product by its part number or title. Robotitem neither sells nor warrants these items: condition, stock and lead times are the seller's, and a listing disappears once sold. Delivered cost includes the seller's actual shipping.
| Weight | 1.88 kg |
| Bore diameter | 35 mm |
| Max misalignment angle | 0 ° |
| Max misalignment axial | 0 mm |
| Max misalignment radial | 0 mm |
| Max outer diameter over screw head | 74.1 mm |
| Max speed | 4 U/min |
| Max torque | 1 100 Nm |
| Outer diameter | 67 mm |
| Temperature max. | 175 °C |
| Temperature min. | -40 °C |
| Tightening torque fastening screws | 39 Nm |
| Total length | 95 mm |
| Coupling type | Rigid two-piece stlye |
Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 – 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft.
Semantically close products available for less — check the specs match your need.
| Electrically insulating | No |
| Material | Steel (1045) |
| Screw iso 4762 thread size x length | M 8 x 25 |
| Stainless | No |
| Surface | Black oxide finish |
| With keyway | No |