MÄDLERMÄDLER· Mechanics & transmission
Set-screw coupling TR bore 14mm with keyway stainless steel 1.4305
Manufacturer part no. 60099214
Manufacturer part no. 60099214
Listed by MÄDLER at €86.54. Delivered to France, including shipping, VAT and any customs duty, it comes to about €121.85. Prices last checked on 2026-10-06.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €86.54 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €20.31 |
| Total delivered | €121.85 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 272 g |
| Bore diameter | 14 mm |
| Max misalignment angle | 0 ° |
| Max misalignment axial | 0 mm |
| Max misalignment radial | 0 mm |
| Max speed | 4 U/min |
| Max torque | 20 Nm |
| Outer diameter | 34 mm |
| Temperature max. | 150 °C |
| Temperature min. | -40 °C |
| Tightening torque fastening screws | 5.8 Nm |
| Total length | 50 mm |
| Bolts din 916 | M 6 |
| Coupling type | Rigid one-piece stlye |
Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection.
Semantically close products available for less — check the specs match your need.
| Electrically insulating |
| No |
| Material | Stainless steel (303) |
| Stainless | Yes |
| Surface | Blank |
| With keyway | Yes |
