MÄDLERMÄDLER· Couplings, Friction Clutches, Safety Couplings
Beam coupling KA made from aluminium max. torque 0.4 Nm overall length 14.2mm outer diameter 9.52mm both sides bore 3mm
Manufacturer part no. 60270200
$31.18≈ 27.08 €
In stock — 4 unitslead time 14 d
Estimated landed cost
| Item | €27.08 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €8.42 |
| Total delivered | €50.50 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Torque | 4.079 kg·cm |
| Weight | 2 g |
Other characteristics
| Bore diameter | 3 mm |
| Max bore diameter | 3.18 mm |
| Max misalignment angular | 3 |
| Max misalignment axial | 0 mm |
| Max torque | 0.4 Nm |
| Outer diameter | 9.52 mm |
| Temperature max. | 120 °C |
| Temperature min. | -40 °C |
| Tightening torque fastening screws | 0.11 Nm |
| Total length | 14.2 mm |
| Bolts size | M 1.6 |
| Coupling type | Torsionally stiff. angular/transversal flexible |
Description
Material: Aluminium 2014A. – torsionally rigid design. – zero backlash. – perfect transmission of torque. – very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side.
Similar products
MÄDLERIn stock
Disc spring set S for safety clutch CM size 25 Nr.61262500 consisting of 6 springs strength S
€77.62$89.38
View at seller ↗
MÄDLERIn stock
Face spanner for two-hole round nuts matching with den Sliding hub ROBA n 612 400 00 and 612 420 00
€147.36$169.68
View at seller ↗
