MÄDLERMÄDLER· Couplings, Friction Clutches, Safety Couplings
Beam coupling LA made from stainless steel max. torque 0.9 Nm overall length 19.55mm outer diameter 9.52mm both sides bore 3mm
Manufacturer part no. 60299800
$43.91≈ 38.13 €
In stock — 1 unitslead time 14 d
Estimated landed cost
| Item | €38.13 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €10.63 |
| Total delivered | €63.76 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Torque | 9.177 kg·cm |
| Weight | 8 g |
Other characteristics
| Bore diameter | 3 mm |
| Max bore diameter | 4.76 mm |
| Max misalignment angular | 3 |
| Max misalignment axial | 0 mm |
| Max torque | 0.9 Nm |
| Outer diameter | 9.52 mm |
| Temperature max. | 120 °C |
| Temperature min. | -40 °C |
| Tightening torque fastening screws | 0.15 Nm |
| Total length | 19.55 mm |
| Bolts size | M 1.6 |
| Coupling type | Torsionally stiff. angular/transversal flexible |
Description
Material: 1.4305 (AISI 303). – torsionally rigid design. – zero backlash. – perfect transmission of torque. – very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge.
Similar products
MÄDLERIn stock
Disc spring set S for safety clutch CM size 25 Nr.61262500 consisting of 6 springs strength S
€77.62$89.38
View at seller ↗
MÄDLERIn stock
Face spanner for two-hole round nuts matching with den Sliding hub ROBA n 612 400 00 and 612 420 00
€147.36$169.68
View at seller ↗
