MÄDLERMÄDLER· Couplings, Friction Clutches, Safety Couplings
Elastic coupling hub RNT size 65 type AS for taper bush 2012
Manufacturer part no. 60520702
$65.30≈ 56.71 €
In stock — 1 unitslead time 14 d
Estimated landed cost
| Item | €56.71 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €14.34 |
| Total delivered | €86.05 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Other characteristics
| Bore length | 33 mm |
| Distance between the hubs | 35 mm |
| Hub diameter | 115 mm |
| Hub length up to flange | 19 mm |
| Max misalignment angle | 1.2 ° |
| Max misalignment axial | 2.6 mm |
| Max misalignment radial | 0.42 mm |
| Max speed | 14 U/min |
| Nominal torque at 92 shore | 625 Nm |
| Nominal torque at 98 shore | 940 Nm |
| Outer diameter | 135 mm |
| Size | 65 |
| Spider 92 shore partno | 60 509 265 |
| Spider 98 shore partno | 60 509 865 |
| Taper bushing type |
Description
Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes)
Similar products
MÄDLERIn stock
Disc spring set S for safety clutch CM size 25 Nr.61262500 consisting of 6 springs strength S
€77.62$89.38
View at seller ↗
MÄDLERIn stock
Face spanner for two-hole round nuts matching with den Sliding hub ROBA n 612 400 00 and 612 420 00
€147.36$169.68
View at seller ↗
