MÄDLERMÄDLER· Couplings, Friction Clutches, Safety Couplings
Elastic coupling hub RNT size 90 type AS for taper bush 3020
Manufacturer part no. 60520902
$166.80≈ 144.85 €
In stock — 1 unitslead time 14 d
Estimated landed cost
| Item | €144.85 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €31.97 |
| Total delivered | €191.82 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Other characteristics
| Bore length | 52 mm |
| Distance between the hubs | 45 mm |
| Hub diameter | 160 mm |
| Hub length up to flange | 33 mm |
| Max misalignment angle | 1.2 ° |
| Max misalignment axial | 3.4 mm |
| Max misalignment radial | 0.5 mm |
| Max speed | 14 U/min |
| Nominal torque at 92 shore | 2 400 Nm |
| Nominal torque at 98 shore | 3 600 Nm |
| Outer diameter | 200 mm |
| Size | 90 |
| Spider 92 shore partno | 60 509 290 |
| Spider 98 shore partno | 60 509 890 |
| Taper bushing type |
Description
Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes)
Similar products
MÄDLERIn stock
Disc spring set S for safety clutch CM size 25 Nr.61262500 consisting of 6 springs strength S
€77.62$89.38
View at seller ↗
MÄDLERIn stock
Face spanner for two-hole round nuts matching with den Sliding hub ROBA n 612 400 00 and 612 420 00
€147.36$169.68
View at seller ↗
