MÄDLERMÄDLER· Couplings, Friction Clutches, Safety Couplings
Elastic coupling RNI stainless steel 1.4305 size 19 max. torque 20Nm nominal torque 10Nm outer diameter 40mm length 66mm no bore
Manufacturer part no. 60599200
$105.49≈ 91.61 €
In stock — 5 unitslead time 14 d
Estimated landed cost
| Item | €91.61 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €21.32 |
| Total delivered | €127.93 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Torque | 203.94 kg·cm |
| Weight | 150 g |
Other characteristics
| Bore length | 25 mm |
| Distance between hub and spider | 2 mm |
| Distance between the hubs | 16 mm |
| Hub diameter | 40 mm |
| Inner diameter spider | 18 mm |
| Max bore | 25 mm |
| Max misalignment angle | 1.2 ° |
| Max misalignment axial | 1.2 mm |
| Max misalignment radial | 0.2 mm |
| Max torque | 20 Nm |
| Min distance for dismantling | 13 mm |
| Nominal torque | 10 Nm |
| Outer diameter | 40 mm |
| Replacement spider 92 shore | 60 509 219 |
| Replacement spider 98 shore part no | 60 509 819 |
| Size | 19 |
| Spider width | 12 mm |
| Temperature max. | 80 °C |
| Temperature min. | -20 °C |
| Torsional angle at max nm | 5 |
| Total length | 66 mm |
| Bore pilot hole | Without bore mm |
| Coupling type | Elastic. angular/transv./long flexible |
| Electrically insulating | No |
| Material | Stainless steel / Polyurethane |
| Max speed at 30 m s | 14000 min-1 |
| Stainless | Yes |
| Surface | Blank |
| With keyway | No |
Description
Material: Hubs of coupling: 1.4305, AISI 303 (1.4571, AISI 316 Ti on request). Spider: Polyurethane, Shore hardness 92°A. Spare spiders either 92°A or 98°A or 64°D Shore. The couplings are available without bore or pre-drilled ex stock. Custom bores or feather keyways available at extra charge. Temperature range: -20°C to +80°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. Weights refer to max. customized bore without keyways.
Similar products
MÄDLERIn stock
Disc spring set S for safety clutch CM size 25 Nr.61262500 consisting of 6 springs strength S
€77.62$89.38
View at seller ↗
MÄDLERIn stock
Face spanner for two-hole round nuts matching with den Sliding hub ROBA n 612 400 00 and 612 420 00
€147.36$169.68
View at seller ↗
