MÄDLERMÄDLER· Couplings, Friction Clutches, Safety Couplings
Sleeve part for toothed coupling BW size 24 bore 20mm with keyway material PA6.6
Manufacturer part no. 60652000
$16.11≈ 13.99 €
In stock — 4 unitslead time 14 d
Estimated landed cost
| Item | €13.99 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €5.80 |
| Total delivered | €34.79 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 45 g |
Other characteristics
| Bore length | 26 mm |
| Bore of sleeve | 20 mm |
| Hub diameter of sleeve | 36 mm |
| Max misalignment angle | 1 ° |
| Max misalignment axial | 1 mm |
| Max misalignment radial | 0.1 mm |
| Max speed | 6 U/min |
| Max torque | 24 Nm |
| Nominal torque | 12 Nm |
| Outer diameter | 53 mm |
| Size | 24 |
| Temperature max. | 100 °C |
| Temperature min. | -25 °C |
| Component |
Description
Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time).
Similar products
MÄDLERIn stock
Disc spring set S for safety clutch CM size 25 Nr.61262500 consisting of 6 springs strength S
€77.62$89.38
View at seller ↗
MÄDLERIn stock
Face spanner for two-hole round nuts matching with den Sliding hub ROBA n 612 400 00 and 612 420 00
€147.36$169.68
View at seller ↗
