MÄDLERMÄDLER· Couplings, Friction Clutches, Safety Couplings
Hub part for toothed coupling BOS II size 32 bore 24mm with keyway sintered metal hub diameter 50mm length 35mm
Manufacturer part no. 60763224
$32.83≈ 28.51 €
In stock — 5 unitslead time 14 d
Estimated landed cost
| Item | €28.51 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €8.70 |
| Total delivered | €52.21 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 500 g |
Other characteristics
| Bore | 24 mm |
| Bore length | 35 mm |
| Distance between the hubs | 13 mm |
| Hub diameter | 50 mm |
| Keyway | 8 mm |
| Max misalignment angle | 2 ° |
| Max misalignment axial | 4 mm |
| Max misalignment radial | 0.4 mm |
| Max torque | 110 Nm |
| Min distance for dismantling | 17 mm |
| Nominal torque | 65 Nm |
| Overhang of hubs | 18 mm |
| Size | 32 |
| Temperature max. |
Description
Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish. Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub). Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced. From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil.
Similar products
MÄDLERIn stock
Disc spring set S for safety clutch CM size 25 Nr.61262500 consisting of 6 springs strength S
€77.62$89.38
View at seller ↗
MÄDLERIn stock
Face spanner for two-hole round nuts matching with den Sliding hub ROBA n 612 400 00 and 612 420 00
€147.36$169.68
View at seller ↗
