MÄDLERMÄDLER
Locking assembly COM-A stainless steel 1.4401 bore 65mm size 65-95
Manufacturer part no. 61599565
$239.38≈ 207.40 €
Price summary
Listed by MÄDLER at €207.40. Delivered to France, including shipping, VAT and any customs duty, it comes to about €266.88. Prices last checked on 2026-08-07.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
On backorderlead time 14 d
Estimated landed cost
| Item | €207.40 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €44.48 |
| Total delivered | €266.88 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 720 g |
Other characteristics
| Admissible axial force | 48 kN |
| Inner diameter | 65 mm |
| Length | 24 mm |
| Outer diameter | 95 mm |
| Tightening torque fastening screws | 18 Nm |
| Transmissible torque | 1 800 Nm |
| Bolts no x size | 16 x M8 |
| Design shape | Cylindrical with several screws |
| Hub surface pressure | 66 N/mm2 |
| Material | Stainless steel (316) |
| Self centering | No |
| Shaft surface pressure | 98 N/mm2 |
| Surface | Blank |
Description
Material: Stainless steel 1.4401 (AISI 316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts – Fastening Torque T – Transmittable Torque F – Transmittable Axial Force P – Surface Pressure onto Hub
Cheaper alternatives
Semantically close products available for less — check the specs match your need.
Similar products
MÄDLERBackorder
Locking assembly COM-A stainless steel 1.4401 bore 60mm size 60-90
€190.23$219.56
View at seller ↗MÄDLERIn stock
Locking assembly COM-A stainless steel 1.4401 bore 35mm size 35-60
€100.53$116.03
View at seller ↗MÄDLERBackorder
Locking assembly COM-A stainless steel 1.4401 bore 55mm size 55-85
€178.34$205.84
View at seller ↗MÄDLERIn stock
Locking assembly COM-A stainless steel 1.4401 bore 40mm size 40-65
€111.46$128.65
View at seller ↗