MÄDLERMÄDLER· Electronic components
Shoulder screw similar to ISO 7379 ø10f9-M8-45mm steel tensile strength class 12.9
Manufacturer part no.
Manufacturer part no.
Listed by MÄDLER at €2.05. Delivered to France, including shipping, VAT and any customs duty, it comes to about €20.46. Prices last checked on 2026-10-04.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €2.05 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €3.41 |
| Total delivered | €20.46 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 40 g |
| Diameter of fitted surface | 13 mm |
| Head diameter | 16 mm |
| Wrench size | 5 mm |
| Material | Steel (strength class 12.9) |
| Surface | Partially black oxide finish |
| Thread size | M 8 mm |
Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: – Ø 4 mm and Ø 5 mm are not included in the ISO. – Ø 6 mm instead of ISO Ø 6.5 mm. – Ø 12 mm instead of ISO Ø 13 mm. – Ø 24 mm instead of ISO Ø 25 mm. – Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered.
Semantically close products available for less — check the specs match your need.