Shoulder screw similar to ISO 7379 ø5f9-M4-20mm stainless steel 1.4301

MÄDLERMÄDLER· Electronic components

Shoulder screw similar to ISO 7379 ø5f9-M4-20mm stainless steel 1.4301

Name: Shoulder screw similar to ISO 7379 ø5f9-M4-20mm stainless steel 1.4301
Brand: MÄDLER
Price: 5.19 USD
Availability: InStock

Manufacturer part no. 619805020

$5.19≈ 4.62 €

Price summary

Listed by MÄDLER at €4.62. Delivered to France, including shipping, VAT and any customs duty, it comes to about €23.54. Prices last checked on 2026-10-04.

Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.

In stock — 1 unitslead time 14 d

View at seller ↗

Estimated landed cost

Landed cost breakdown
Item	€4.62
Shipping	€15.00
VAT (20%)	€3.92
Total delivered	€23.54

Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.

Datasheets & documents

Specifications (automatically extracted)

Mechanical

Weight

4.9 g

Other characteristics

Diameter of fitted surface	8 mm
Head diameter	9 mm
Wrench size	2.5 mm
Material	Stainless Steel (304)
Surface	Blank
Thread size	M 4 mm

Description

Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: – Ø 4 mm and Ø 5 mm are not included in the ISO. – Ø 6 mm instead of ISO Ø 6.5 mm. – Ø 12 mm instead of ISO Ø 13 mm. – Ø 24 mm instead of ISO Ø 25 mm. – Concentricity 2 IT 13 and 2 IT 10 may vary. – The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered.