MÄDLERMÄDLER· Electronic components
Shoulder screw similar to ISO 7379 ø12f9-M10-30mm stainless steel 1.4301
Manufacturer part no.
Manufacturer part no.
Listed by MÄDLER at €9.07. Delivered to France, including shipping, VAT and any customs duty, it comes to about €28.88. Prices last checked on 2026-10-04.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €9.07 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €4.81 |
| Total delivered | €28.88 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 48 g |
| Diameter of fitted surface | 16 mm |
| Head diameter | 18 mm |
| Wrench size | 6 mm |
| Material | Stainless Steel (304) |
| Surface | Blank |
| Thread size | M 10 mm |
Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: – Ø 4 mm and Ø 5 mm are not included in the ISO. – Ø 6 mm instead of ISO Ø 6.5 mm. – Ø 12 mm instead of ISO Ø 13 mm. – Ø 24 mm instead of ISO Ø 25 mm. – Concentricity 2 IT 13 and 2 IT 10 may vary. – The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered.
Semantically close products available for less — check the specs match your need.