MÄDLERMÄDLER· Locking Assemblies, Clamping Bushes, Taper Bushes
Taper bush 1215 bore 18mm
Manufacturer part no. 62251318
$13.12≈ 11.39 €
In stock — 1 unitslead time 14 d
Estimated landed cost
| Item | €11.39 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €5.28 |
| Total delivered | €31.67 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 350 g |
Other characteristics
| Bore | 18 mm |
| Clamp bushing type | 1 215 |
| Depth of keyway | 2.8 mm |
| Keyway width | 6 mm |
| Length | 38.1 mm |
| Outer diameter | 47.5 mm |
| Material | Grey cast iron (A48) |
| Surface | Blank |
Description
Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19 mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm.
