MÄDLERMÄDLER· Mechanics & transmission
Flanged bush slotted version 35 x 39 / 47 x 40 mm
Manufacturer part no. 62413540
Manufacturer part no. 62413540
Listed by MÄDLER at €7.15. Delivered to France, including shipping, VAT and any customs duty, it comes to about €26.58. Prices last checked on 2026-10-04.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €7.15 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €4.43 |
| Total delivered | €26.58 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 81.4 g |
| Dimensions | 47x40mm |
| Inner diameter | 35 mm |
| Length | 40 mm |
| Outer diameter | 39 mm |
| Material | Steel |
| Surface | Tin plated / PTFE-coated |
Plain bearing flange bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no ‘stick slip’. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 – 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 Paired contact surface Recommended: hardened contact surfaces with a surface roughness of Rz3 and finer.
Semantically close products available for less — check the specs match your need.
