MÄDLERMÄDLER· Mechanics & transmission
Manufacturer part no. 63231000
Listed by MÄDLER at €24.13. Delivered to France, including shipping, VAT and any customs duty, it comes to about €46.96. Prices last checked on 2026-10-05.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €24.13 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €7.83 |
| Total delivered | €46.96 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Boîtier industriel Bopla 63231000 ABS gris clair (RAL 7035) 160 x 80 x 87 1
New · sold by conrad_france · ships from FR
€35.98
€35.98 delivered
Boîtier 63231000 : universel X : 80 mm Y : 160 mm Z : 87 mm EUROMAS II ABS gr...
New · sold by vuelectroniccomponents · ships from DE
€41.63
€49.70 delivered
BOPLA 63231000 Euromas Boîtier ABS Gris-Blanc RAL 7035 1Pc
New · sold by rapidwarehouse-office · ships from GB
Imported from outside the EU — duties and VAT included in the delivered cost; customs formalities and delays are not
€42.26
€56.31 delivered
BOPLA 63231000 Boîtier
New · sold by patkor1 · ships from PL
€52.92
€62.92 delivered
Third-party listings on eBay, matched to this product by its part number or title. Robotitem neither sells nor warrants these items: condition, stock and lead times are the seller's, and a listing disappears once sold. Delivered cost includes the seller's actual shipping.
| Weight | 56 g |
| Bore | 10 mm |
| Center distance to mounting surface | 48 mm |
| Outer diameter | 28 mm |
| Thread pitch | 1.5 mm |
| Tilt angel | 13 ° |
| Material | Steel / Brass |
| Surface | Zinc-plated |
| Thread size | M 10 mm |
| Thread type | left |
Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use
Semantically close products available for less — check the specs match your need.
