MÄDLERMÄDLER· Bearings, Bushes, Seals
Radial shaft seal type A with one sealing lip 30 x 42 x 7mm
Manufacturer part no. 64790164
$5.34≈ 4.64 €
In stock — 1 unitslead time 14 d
Estimated landed cost
| Item | €4.64 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €3.93 |
| Total delivered | €23.57 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 8.3 g |
| Dimensions | 30x42x7mm |
Other characteristics
| Inner diameter | 30 mm |
| Outer diameter | 42 mm |
| Width | 7 mm |
| Material | NBR / Steel |
| Surface | Blank |
Description
Material: Elastomer: NBR. Stiffening ring and tension spring from steel. • According to DIN 3760 Design A respectively ISO 6194-1 figure 1 and in many additional sizes. • Most common design, with one seal lip. • For oil- and grease-lubricated applications. • For high speed, sliding speed up to 14m/s. Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm. Temperatur range: -40°C to +100°C (for short time up to +120°C).
Similar products
MÄDLERIn stock
Radial shaft seal type A with one sealing lip 50 x 90 x 10mm
€9.41$10.83
View at seller ↗MÄDLERIn stock
Radial shaft seal type A with one sealing lip 50 x 85 x 10mm
€9.29$10.70
View at seller ↗MÄDLERIn stock
Radial shaft seal type A with one sealing lip 50 x 80 x 10mm
€8.74$10.06
View at seller ↗MÄDLERIn stock
Radial shaft seal type A with one sealing lip 50 x 80 x 8mm
€8.74$10.06
View at seller ↗