MÄDLERMÄDLER· Mechanics & transmission
Radial shaft seal type A with one sealing lip 30 x 50 x 7mm
Manufacturer part no. 64790176
$6.16≈ 5.35 €
Price summary
Listed by MÄDLER at €5.35. Delivered to France, including shipping, VAT and any customs duty, it comes to about €24.42. Prices last checked on 2026-08-05.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
On backorderlead time 14 d
Estimated landed cost
| Item | €5.35 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €4.07 |
| Total delivered | €24.42 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 13.8 g |
| Dimensions | 30x50x7mm |
Other characteristics
| Inner diameter | 30 mm |
| Outer diameter | 50 mm |
| Width | 7 mm |
| Material | NBR / Steel |
| Surface | Blank |
Description
Material: Elastomer: NBR. Stiffening ring and tension spring from steel. • According to DIN 3760 Design A respectively ISO 6194-1 figure 1 and in many additional sizes. • Most common design, with one seal lip. • For oil- and grease-lubricated applications. • For high speed, sliding speed up to 14m/s. Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm. Temperatur range: -40°C to +100°C (for short time up to +120°C).
Cheaper alternatives
Semantically close products available for less — check the specs match your need.
