MÄDLERMÄDLER· Mechanics & transmission
Radial shaft seal type A with one sealing lip 38 x 62 x 10mm
Manufacturer part no. 64790255
Manufacturer part no. 64790255
Listed by MÄDLER at €6.98. Delivered to France, including shipping, VAT and any customs duty, it comes to about €26.38. Prices last checked on 2026-10-05.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €6.98 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €4.40 |
| Total delivered | €26.38 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 24.6 g |
| Dimensions | 38x62x10mm |
| Inner diameter | 38 mm |
| Outer diameter | 62 mm |
| Width | 10 mm |
| Material | NBR / Steel |
| Surface | Blank |
Material: Elastomer: NBR. Stiffening ring and tension spring from steel. • According to DIN 3760 Design A respectively ISO 6194-1 figure 1 and in many additional sizes. • Most common design, with one seal lip. • For oil- and grease-lubricated applications. • For high speed, sliding speed up to 14m/s. Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm. Temperatur range: -40°C to +100°C (for short time up to +120°C).
Semantically close products available for less — check the specs match your need.
