MÄDLERMÄDLER· Mechanics & transmission
Locknut KMT 19 M95x2
Manufacturer part no. 65358019
$145.96≈ 126.54 €
Manufacturer part no. 65358019
Listed by MÄDLER at €126.54. Delivered to France, including shipping, VAT and any customs duty, it comes to about €169.85. Prices last checked on 2026-08-09.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €126.54 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €28.31 |
| Total delivered | €169.85 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Permissible axial load | 710 kN |
| Tightening torque | 35 Nm |
| Material | Steel / Brass |
| Surface | Black oxide finish |
| Thread size x pitch | M 95×2 mm |
| Type | KMT 19 |
Material: Body of the nut steel, min. strength 350 N/mm2. Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking. 1) Fastening Torque of Locking Screw
Semantically close products available for less — check the specs match your need.
