MÄDLERMÄDLER· Mechanics & transmission
Conical seat DIN 6319 form G diameter 17mm for bolt diameter 6mm steel hardened
Manufacturer part no.
Manufacturer part no.
Listed by MÄDLER at €0.99. Delivered to France, including shipping, VAT and any customs duty, it comes to about €19.19. Prices last checked on 2026-08-05.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €0.99 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €3.20 |
| Total delivered | €19.19 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 5.6 g |
| Height | 4 mm |
| Inner diameter | 7.1 mm |
| Optional spherical washer partno | 65 540 600 |
| Outer diameter | 17 mm |
| Static load | 9 kN |
| For bolt diameter | M 6 mm |
| Material | Steel |
| Surface | Phosphated |
Material: Steel, bright turned, tempered steel, phosphated and oiled. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load.
Semantically close products available for less — check the specs match your need.
