Rubber-metal buffer MGP diameter 100mm height 55mm thread M16x42

MÄDLERMÄDLER

Rubber-metal buffer MGP diameter 100mm height 55mm thread M16x42

Name: Rubber-metal buffer MGP diameter 100mm height 55mm thread M16x42
Brand: MÄDLER
Price: 38.77 USD
Availability: BackOrder

Manufacturer part no. 68532155

$38.77≈ 33.56 €

Price summary

Listed by MÄDLER at €33.56. Delivered to France, including shipping, VAT and any customs duty, it comes to about €58.27. Prices last checked on 2026-08-05.

Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.

On backorderlead time 14 d

View at seller ↗

Estimated landed cost

Landed cost breakdown
Item	€33.56
Shipping	€15.00
VAT (20%)	€9.71
Total delivered	€58.27

Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.

Datasheets & documents

Specifications (automatically extracted)

Mechanical

Weight

845 g

Other characteristics

Height	55 mm
Outer diameter	100 mm
Pressure load	4 200 N
Shearing load	1 600 N
Spring rate medium for pressure load	892 N/mm
Spring rate medium for shearing load	145 N/mm
Thread length	42 mm
Material	Natural rubber / Steel
Surface	Zinc-plated
Thread size	M 16 mm

Description

Material: Metal parts: Steel, zinc-plated. Elastomer: Natural rubber, 55° Shore hardness. Rubber-Metal buffers are simple, reasonably priced standard components used for elastic mounting. When shearing load occurs their load-bearing capacity is considerably lower than with pressure load. This has to be considered when horizontal mass forces or belt traction occur. The grade of rubber used has perfect physical properties. Temperature resistant up to 80°C. For a linear resilience characteristic the Spring Load C means, for any operating point, the constant relation of load F [N] to jounce travel f [mm]. C = F/f [N/mm]. In the technical data, these constants are stated as CD for pure pressure load and as CS for pure shear load. * F perm. is the permissible static permanent load, which may be overlaid by a dynamic, alternating load. With shearing load please take care that no tension load in the rubber occurs at all during mounting. To achieve a sufficient fatigue strength provide some compressive prestressing. The stated permissible loads are only approximate, guideline values for the static load for "medium" rubber hardness. With particularly high, dynamic, alternating loads or high frequencies, the load figures have to be accordingly reduced.