Sprocket KRS with hub pitch 4mm 12 teeth material steel vs Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 08 B-1 1/2×5/16″ 15 teeth with ball bearing
Sprocket KRS with hub pitch 4mm 12 teeth material steel and Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 08 B-1 1/2×5/16″ 15 teeth with ball bearing are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Sprocket KRS with hub pitch 4mm 12 teeth material steel is €11.82 cheaper ($14.30).
| Criterion |  Sprocket KRS with hub pitch 4mm 12 teeth material steel |  Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 08 B-1 1/2×5/16″ 15 teeth with ball bearing |
|---|---|---|
| Price | $14.30cheapest | $27.94 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 8 g | 150 g |
| Bore | 5 mm | 10 mm |
| Bore tolerance | — | +0 / -0.008 mm |
| Din iso no | 4 mm | 08 B-1 |
| Hardened | No | — |
| Hub | One sided | — |
| Hub diameter | 10 mm | — |
| Load rating dyn | — | 3.1 kN |
| Material | Low-carbon steel | Stainless steel |
| No of teeth | 12 | 15 |
| Number of strands | 1 | 1 |
| Outer diameter | 16.9 mm | 65.5 mm |
| Outer diameter of insert | — | 30 mm |
| Pitch circle diameter | 15.45 mm | 61.09 mm |
| Pitch mm inch | — | 1/2 x 5/16″ |
| Static load rating | — | 1.4 kN |
| Surface | Blank | Blank |
| Tooth width | — | 7.2 mm |
| Total length | 11 mm | — |
| Total width | — | 9 mm |
| Type | — | B |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.