Sprocket KRS with hub pitch 4mm 14 teeth material steel vs Chain tensioning wheel KSP 06 B-1 3/8×7/32″ 20 teeth with ball bearing
Sprocket KRS with hub pitch 4mm 14 teeth material steel and Chain tensioning wheel KSP 06 B-1 3/8×7/32″ 20 teeth with ball bearing are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Chain tensioning wheel KSP 06 B-1 3/8×7/32″ 20 teeth with ball bearing is €12.22 cheaper ($19.93).
| Criterion |  Sprocket KRS with hub pitch 4mm 14 teeth material steel |  Chain tensioning wheel KSP 06 B-1 3/8×7/32″ 20 teeth with ball bearing |
|---|---|---|
| Price | $34.03 | $19.93cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 11 g | 135 g |
| Bore | 5 mm | 16 +0.26 / +0.13 mm |
| Din iso no | 4 mm | 06 B-1 |
| Hardened | No | — |
| Hub | One sided | — |
| Hub diameter | 12.5 mm | — |
| Insert width | — | 12 mm |
| Load rating dyn | — | 7.5 kN |
| Material | Low-carbon steel | Steel (1045) / Roller bearing steel |
| No of teeth | 14 | 20 |
| Number of strands | 1 | 1 |
| Outer diameter | 19.5 mm | 64.3 mm |
| Outer diameter of insert | — | 40 mm |
| Pitch circle diameter | 17.98 mm | 60.89 mm |
| Pitch mm inch | — | 3/8 x 7/32″ |
| Sprocket width | — | 7 mm |
| Static load rating | — | 4.5 kN |
| Surface | Blank | Black oxide finish |
| Tooth width | — | 5.3 mm |
| Total length | 12 mm | — |
| Total width | — | 18.3 mm |
| Width of tooth flank | — | 1 mm |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.