Sprocket KRS with hub pitch 4mm 14 teeth material steel vs Chain tensioning wheel KSP 16 B-1 1″x17,02mm 12 teeth with ball bearing
Sprocket KRS with hub pitch 4mm 14 teeth material steel and Chain tensioning wheel KSP 16 B-1 1″x17,02mm 12 teeth with ball bearing are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Sprocket KRS with hub pitch 4mm 14 teeth material steel is €6.72 cheaper ($34.03).
| Criterion |  Sprocket KRS with hub pitch 4mm 14 teeth material steel |  Chain tensioning wheel KSP 16 B-1 1″x17,02mm 12 teeth with ball bearing |
|---|---|---|
| Price | $34.03cheapest | $41.78 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 11 g | 705 g |
| Bore | 5 mm | 20 +0 / -0.01 mm |
| Din iso no | 4 mm | 16 B-1 |
| Hardened | No | — |
| Hub | One sided | — |
| Hub diameter | 12.5 mm | — |
| Insert width | — | 14 mm |
| Load rating dyn | — | 10.1 kN |
| Material | Low-carbon steel | Steel (1045) / Roller bearing steel |
| No of teeth | 14 | 12 |
| Number of strands | 1 | 1 |
| Outer diameter | 19.5 mm | 109 mm |
| Outer diameter of insert | — | 47 mm |
| Pitch circle diameter | 17.98 mm | 98.14 mm |
| Pitch mm inch | — | 1″ x 17,02 mm |
| Sprocket width | — | 16.2 mm |
| Static load rating | — | 6.3 kN |
| Surface | Blank | Black oxide finish |
| Tooth width | — | 16.2 mm |
| Total length | 12 mm | — |
| Total width | — | 17.7 mm |
| Width of tooth flank | — | 2.5 mm |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.