Sprocket KRS with hub pitch 4mm 14 teeth material steel vs Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 06 B-1 3/8×7/32″ 15 teeth with ball bearing
Sprocket KRS with hub pitch 4mm 14 teeth material steel and Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 06 B-1 3/8×7/32″ 15 teeth with ball bearing are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 06 B-1 3/8×7/32″ 15 teeth with ball bearing is €8.17 cheaper ($24.60).
| Criterion |  Sprocket KRS with hub pitch 4mm 14 teeth material steel |  Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 06 B-1 3/8×7/32″ 15 teeth with ball bearing |
|---|---|---|
| Price | $34.03 | $24.60cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 11 g | 60 g |
| Bore | 5 mm | 10 mm |
| Bore tolerance | — | +0 / -0.008 mm |
| Din iso no | 4 mm | 06 B-1 |
| Hardened | No | — |
| Hub | One sided | — |
| Hub diameter | 12.5 mm | — |
| Load rating dyn | — | 3.1 kN |
| Material | Low-carbon steel | Stainless steel |
| No of teeth | 14 | 15 |
| Number of strands | 1 | 1 |
| Outer diameter | 19.5 mm | 49.5 mm |
| Outer diameter of insert | — | 30 mm |
| Pitch circle diameter | 17.98 mm | 45.81 mm |
| Pitch mm inch | — | 3/8 x 7/32″ |
| Static load rating | — | 1.4 kN |
| Surface | Blank | Blank |
| Tooth width | — | 5.3 mm |
| Total length | 12 mm | — |
| Total width | — | 9 mm |
| Type | — | B |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.