Sprocket KRS with hub pitch 4mm 57 teeth material steel vs Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 16 B-1 1″x17.02mm 13 teeth with ball bearing
Sprocket KRS with hub pitch 4mm 57 teeth material steel and Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 16 B-1 1″x17.02mm 13 teeth with ball bearing are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Sprocket KRS with hub pitch 4mm 57 teeth material steel is €22.99 cheaper ($65.05).
| Criterion |  Sprocket KRS with hub pitch 4mm 57 teeth material steel |  Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 16 B-1 1″x17.02mm 13 teeth with ball bearing |
|---|---|---|
| Price | $65.05cheapest | $91.57 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 276 g | 880 g |
| Bore | 8 mm | 20 mm |
| Bore tolerance | — | +0 / -0.01 mm |
| Din iso no | 4 mm | 16 B-1 |
| Hardened | No | — |
| Hub | One sided | — |
| Hub diameter | 50 mm | — |
| Load rating dyn | — | 8.4 kN |
| Material | Low-carbon steel | Stainless steel |
| No of teeth | 57 | 13 |
| Number of strands | 1 | 1 |
| Outer diameter | 74.5 mm | 117.7 mm |
| Outer diameter of insert | — | 52 mm |
| Pitch circle diameter | 72.61 mm | 106.12 mm |
| Pitch mm inch | — | 1″ x 17,02 mm |
| Static load rating | — | 4.7 kN |
| Surface | Blank | Blank |
| Tooth width | — | 16.2 mm |
| Total length | 16 mm | — |
| Total width | — | 15 mm |
| Type | — | B |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.