Chain coupling pitch 5/8 x 3/8″ 18 teeth nominal torque 380Nm vs Elastic pin coupling MAEPEX cast iron Baugröße 110 max. torque 480Nm nominal torque 160Nm outer diameter 110mm Länge 82mm no bore
Chain coupling pitch 5/8 x 3/8″ 18 teeth nominal torque 380Nm and Elastic pin coupling MAEPEX cast iron Baugröße 110 max. torque 480Nm nominal torque 160Nm outer diameter 110mm Länge 82mm no bore are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Chain coupling pitch 5/8 x 3/8″ 18 teeth nominal torque 380Nm is €50.23 cheaper ($93.38).
| Criterion |  Chain coupling pitch 5/8 x 3/8″ 18 teeth nominal torque 380Nm |  Elastic pin coupling MAEPEX cast iron Baugröße 110 max. torque 480Nm nominal torque 160Nm outer diameter 110mm Länge 82mm no bore |
|---|---|---|
| Price | $93.38cheapest | $151.32 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Torque | 3 874,9 kg·cm | 4 894,6 kg·cm |
| Weight | 3.21 kg | 4.13 kg |
| Bore pilot hole | — | Without bore mm |
| Coupling type | Elastic. angular/transv./long flexible | Elastic. angular/transv./long flexible |
| Din iso no | 10 B-2 | — |
| Distance between the hubs | — | 2 – 4 mm |
| Electrically insulating | No | No |
| Flange width l3 | — | 34 mm |
| Flange width l4 | — | 14 mm |
| Hub diameter | 75 mm | — |
| Hub diameter d1 | — | 86 mm |
| Hub diameter d2 | — | 86 mm |
| Hub length | — | 40 mm |
| Length of each sprocket | 35 mm | — |
| Material | Steel | Grey cast iron/NBR |
| Max bore d1 | — | 48 mm |
| Max bore d2 | — | 48 mm |
| Max misalignment angle | 0.5 ° | 0.2 ° |
| Max misalignment axial | 0.25 mm | 2 mm |
| Max misalignment radial | 0.2 mm | 0.1 mm |
| Max outer diameter | 107 mm | — |
| Max speed | 4500 min-1 | 5000 min-1 |
| Max torque | 380 Nm | 480 Nm |
| Min bore diameter | 15 mm | — |
| Moment of inertia | 0.01300 kgm2 | — |
| Mounting distance over tooth flanks | 25 mm | — |
| Nominal torque | — | 160 Nm |
| Outer diameter | — | 110 mm |
| Power speed max. | 0.0390 kW/min -1 | — |
| Size | — | 110 |
| Stainless | No | No |
| Surface | Blank | Blank |
| Temperature max. | 220 °C | 80 °C |
| Temperature min. | -30 °C | -30 °C |
| Total length | 78 mm | 82 mm |
| Wear limit of backlash measured at the circumfer | — | 7 mm |
| With keyway | No | No |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.