Chain coupling pitch 3/4 x 7/16″ 18 teeth nominal torque 600Nm vs Elastic pin coupling MAEPEX cast iron Baugröße 95 max. torque 300Nm nominal torque 100Nm outer diameter 95mm Länge 72mm no bore
Chain coupling pitch 3/4 x 7/16″ 18 teeth nominal torque 600Nm and Elastic pin coupling MAEPEX cast iron Baugröße 95 max. torque 300Nm nominal torque 100Nm outer diameter 95mm Länge 72mm no bore are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Elastic pin coupling MAEPEX cast iron Baugröße 95 max. torque 300Nm nominal torque 100Nm outer diameter 95mm Länge 72mm no bore is €13.55 cheaper ($107.60).
| Criterion |  Chain coupling pitch 3/4 x 7/16″ 18 teeth nominal torque 600Nm |  Elastic pin coupling MAEPEX cast iron Baugröße 95 max. torque 300Nm nominal torque 100Nm outer diameter 95mm Länge 72mm no bore |
|---|---|---|
| Price | $123.23 | $107.60cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Torque | 6 118,2 kg·cm | 3 059,1 kg·cm |
| Weight | 4.97 kg | 2.76 kg |
| Bore pilot hole | — | Without bore mm |
| Coupling type | Elastic. angular/transv./long flexible | Elastic. angular/transv./long flexible |
| Din iso no | 12 B-2 | — |
| Distance between the hubs | — | 2 – 4 mm |
| Electrically insulating | No | No |
| Flange width l3 | — | 30 mm |
| Flange width l4 | — | 12 mm |
| Hub diameter | 90 mm | — |
| Hub diameter d1 | — | 76 mm |
| Hub diameter d2 | — | 76 mm |
| Hub length | — | 35 mm |
| Length of each sprocket | 40 mm | — |
| Material | Steel | Grey cast iron/NBR |
| Max bore d1 | — | 42 mm |
| Max bore d2 | — | 42 mm |
| Max misalignment angle | 0.5 ° | 0.2 ° |
| Max misalignment axial | 0.25 mm | 2 mm |
| Max misalignment radial | 0.2 mm | 0.1 mm |
| Max outer diameter | 126.5 mm | — |
| Max speed | 3000 min-1 | 5000 min-1 |
| Max torque | 600 Nm | 300 Nm |
| Min bore diameter | 25 mm | — |
| Moment of inertia | 0.03010 kgm2 | — |
| Mounting distance over tooth flanks | 29.5 mm | — |
| Nominal torque | — | 100 Nm |
| Outer diameter | — | 95 mm |
| Power speed max. | 0.0616 kW/min -1 | — |
| Size | — | 95 |
| Stainless | No | No |
| Surface | Blank | Blank |
| Temperature max. | 220 °C | 80 °C |
| Temperature min. | -30 °C | -30 °C |
| Total length | 89.5 mm | 72 mm |
| Wear limit of backlash measured at the circumfer | — | 6 mm |
| With keyway | No | No |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.