Chain coupling pitch 3/4 x 7/16″ 18 teeth nominal torque 600Nm vs Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 110 max. torque 480Nm nominal torque 160Nm outer diameter 110mm Länge 82mm no bore
Chain coupling pitch 3/4 x 7/16″ 18 teeth nominal torque 600Nm and Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 110 max. torque 480Nm nominal torque 160Nm outer diameter 110mm Länge 82mm no bore are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Chain coupling pitch 3/4 x 7/16″ 18 teeth nominal torque 600Nm is €34.31 cheaper ($123.23).
| Criterion |  Chain coupling pitch 3/4 x 7/16″ 18 teeth nominal torque 600Nm |  Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 110 max. torque 480Nm nominal torque 160Nm outer diameter 110mm Länge 82mm no bore |
|---|---|---|
| Price | $123.23cheapest | $162.83 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Torque | 6 118,2 kg·cm | 4 894,6 kg·cm |
| Weight | 4.97 kg | 3.88 kg |
| Bore pilot hole | — | Without bore mm |
| Coupling type | Elastic. angular/transv./long flexible | Elastic. angular/transv./long flexible |
| Din iso no | 12 B-2 | — |
| Distance between the hubs | — | 2 – 4 mm |
| Electrically insulating | No | No |
| Flange width l3 | — | 34 mm |
| Flange width l4 | — | 20 mm |
| Hub diameter | 90 mm | — |
| Hub diameter d1 | — | 86 mm |
| Hub diameter d2 | — | 62 mm |
| Hub length | — | 40 mm |
| Length of each sprocket | 40 mm | — |
| Material | Steel | Grey cast iron/NBR |
| Max bore d1 | — | 48 mm |
| Max bore d2 | — | 38 mm |
| Max misalignment angle | 0.5 ° | 0.2 ° |
| Max misalignment axial | 0.25 mm | 2 mm |
| Max misalignment radial | 0.2 mm | 0.1 mm |
| Max outer diameter | 126.5 mm | — |
| Max speed | 3000 min-1 | 5000 min-1 |
| Max torque | 600 Nm | 480 Nm |
| Min bore diameter | 25 mm | — |
| Min distance for dismantling | — | 33 mm |
| Moment of inertia | 0.03010 kgm2 | — |
| Mounting distance over tooth flanks | 29.5 mm | — |
| Nominal torque | — | 160 Nm |
| Outer diameter | — | 110 mm |
| Power speed max. | 0.0616 kW/min -1 | — |
| Size | — | 110 |
| Stainless | No | No |
| Surface | Blank | Blank |
| Temperature max. | 220 °C | 80 °C |
| Temperature min. | -30 °C | -30 °C |
| Total length | 89.5 mm | 82 mm |
| Wear limit of backlash measured at the circumfer | — | 7 mm |
| With keyway | No | No |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.