Chain coupling type 5014 10 A-2 14 teeth nominal torque 250 Nm with casing vs Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 110 max. torque 480Nm nominal torque 160Nm outer diameter 110mm Länge 82mm no bore
Chain coupling type 5014 10 A-2 14 teeth nominal torque 250 Nm with casing and Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 110 max. torque 480Nm nominal torque 160Nm outer diameter 110mm Länge 82mm no bore are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Chain coupling type 5014 10 A-2 14 teeth nominal torque 250 Nm with casing is €57.45 cheaper ($96.56).
| Criterion |  Chain coupling type 5014 10 A-2 14 teeth nominal torque 250 Nm with casing |  Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 110 max. torque 480Nm nominal torque 160Nm outer diameter 110mm Länge 82mm no bore |
|---|---|---|
| Price | $96.56cheapest | $162.83 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Current | 10 A | — |
| Torque | 2 549,3 kg·cm | 4 894,6 kg·cm |
| Weight | 2.62 kg | 3.88 kg |
| Bore | 14.5 mm | — |
| Bore pilot hole | — | Without bore mm |
| Chain din | 10 A-2 | — |
| Coupling type | Elastic. angular/transv./long flexible | Elastic. angular/transv./long flexible |
| Distance between the hubs | — | 2 – 4 mm |
| Electrically insulating | No | No |
| Flange width l3 | — | 34 mm |
| Flange width l4 | — | 20 mm |
| Hub diameter d1 | — | 86 mm |
| Hub diameter d2 | — | 62 mm |
| Hub diameter sprocket | 56 mm | — |
| Hub length | — | 40 mm |
| Length of each sprocket | 45 mm | — |
| Length of housing | 85 mm | — |
| Material | Steel / Aluminum | Grey cast iron/NBR |
| Max bore d1 | — | 48 mm |
| Max bore d2 | — | 38 mm |
| Max bore diameter | 35 mm | — |
| Max misalignment angle | 0.5 ° | 0.2 ° |
| Max misalignment axial | 0.2 mm | 2 mm |
| Max misalignment radial | 0.2 mm | 0.1 mm |
| Max outer diameter without housing | 86 mm | — |
| Max speed | 3600 min-1 | 5000 min-1 |
| Max torque | 620 Nm | 480 Nm |
| Min distance for dismantling | — | 33 mm |
| Mounting distance | 9.7 mm | — |
| Nominal torque | 250 Nm | 160 Nm |
| Outer diameter | 101 mm | 110 mm |
| Replacement chain partno | 14 035 114 | — |
| Size | — | 110 |
| Stainless | No | No |
| Surface | Varnished (Housing) | Blank |
| Temperature max. | 120 °C | 80 °C |
| Temperature min. | -30 °C | -30 °C |
| Total length | 99.7 mm | 82 mm |
| Type | 5 014 | — |
| Wear limit of backlash measured at the circumfer | — | 7 mm |
| With keyway | No | No |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.