Chain coupling type 5014 10 A-2 14 teeth nominal torque 250 Nm with casing vs Sliding hub FS torque adjustable 7-34 Nm with pilot bore 10H8 outer diameter 64mm max. bore: 22mm bush length 10.3mm
Chain coupling type 5014 10 A-2 14 teeth nominal torque 250 Nm with casing and Sliding hub FS torque adjustable 7-34 Nm with pilot bore 10H8 outer diameter 64mm max. bore: 22mm bush length 10.3mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Chain coupling type 5014 10 A-2 14 teeth nominal torque 250 Nm with casing is €16.58 cheaper ($96.56).
| Criterion |  Chain coupling type 5014 10 A-2 14 teeth nominal torque 250 Nm with casing |  Sliding hub FS torque adjustable 7-34 Nm with pilot bore 10H8 outer diameter 64mm max. bore: 22mm bush length 10.3mm |
|---|---|---|
| Price | $96.56cheapest | $115.68 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Current | 10 A | — |
| Torque | 2 549,3 kg·cm | 346.698 kg·cm |
| Weight | 2.62 kg | 700 g |
| Alternative bushing length 1 | — | 12.2 mm |
| Alternative bushing length 2 | — | 14 mm |
| Bore | 14.5 mm | — |
| Bore of sprocket h8 | — | 41.33 mm |
| Bore pilot hole | — | 10 mm |
| Chain din | 10 A-2 | — |
| Coupling type | Elastic. angular/transv./long flexible | — |
| Disc springs quantity | — | 1 |
| Electrically insulating | No | — |
| Hub diameter sprocket | 56 mm | — |
| Length of each sprocket | 45 mm | — |
| Length of housing | 85 mm | — |
| Material | Steel / Aluminum | Steel |
| Max bore diameter | 35 mm | 22 mm |
| Max misalignment angle | 0.5 ° | — |
| Max misalignment axial | 0.2 mm | — |
| Max misalignment radial | 0.2 mm | — |
| Max outer diameter without housing | 86 mm | — |
| Max speed | 3600 min-1 | 3000 min-1 |
| Max torque | 620 Nm | 7 – 34 Nm |
| Mounting distance | 9.7 mm | — |
| Nominal torque | 250 Nm | — |
| Outer diameter | 101 mm | 64 mm |
| Replacement chain partno | 14 035 114 | — |
| Size | — | 250-1 |
| Stainless | No | — |
| Standard bushing length | — | 10.3 mm |
| Surface | Varnished (Housing) | Zinc-plated |
| Temperature max. | 120 °C | — |
| Temperature min. | -30 °C | — |
| Total length | 99.7 mm | 48 mm |
| Type | 5 014 | — |
| With keyway | No | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.