Chain coupling type 6018 12 A-2 18 teeth nominal torque 630 Nm with casing vs Elastic pin coupling MAEPEX cast iron Baugröße 160 max. torque 1680Nm nominal torque 560Nm outer diameter 160mm Länge 122mm no bore
Chain coupling type 6018 12 A-2 18 teeth nominal torque 630 Nm with casing and Elastic pin coupling MAEPEX cast iron Baugröße 160 max. torque 1680Nm nominal torque 560Nm outer diameter 160mm Länge 122mm no bore are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Chain coupling type 6018 12 A-2 18 teeth nominal torque 630 Nm with casing is €109.34 cheaper ($194.46).
| Criterion |  Chain coupling type 6018 12 A-2 18 teeth nominal torque 630 Nm with casing |  Elastic pin coupling MAEPEX cast iron Baugröße 160 max. torque 1680Nm nominal torque 560Nm outer diameter 160mm Länge 122mm no bore |
|---|---|---|
| Price | $194.46cheapest | $320.58 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Current | 12 A | — |
| Torque | 6 424,1 kg·cm | 5 710,3 kg·cm |
| Weight | 7.75 kg | 11.04 kg |
| Bore | 20 mm | — |
| Bore pilot hole | — | Without bore mm |
| Chain din | 12 A-2 | — |
| Coupling type | Elastic. angular/transv./long flexible | Elastic. angular/transv./long flexible |
| Distance between the hubs | — | 2 – 6 mm |
| Electrically insulating | No | No |
| Flange width l3 | — | 40 mm |
| Flange width l4 | — | 20 mm |
| Hub diameter d1 | — | 108 mm |
| Hub diameter d2 | — | 108 mm |
| Hub diameter sprocket | 89.5 mm | — |
| Hub length | — | 60 mm |
| Length of each sprocket | 56 mm | — |
| Length of housing | 105 mm | — |
| Material | Steel / Aluminum | Grey cast iron/NBR |
| Max bore d1 | — | 65 mm |
| Max bore d2 | — | 65 mm |
| Max bore diameter | 56 mm | — |
| Max misalignment angle | 0.5 ° | 0.2 ° |
| Max misalignment axial | 0.25 mm | 2 mm |
| Max misalignment radial | 0.2 mm | 0.1 mm |
| Max outer diameter without housing | 127 mm | — |
| Max speed | 2500 min-1 | 4250 min-1 |
| Max torque | 1 810 Nm | 1 680 Nm |
| Mounting distance | 11.5 mm | — |
| Nominal torque | 630 Nm | 560 Nm |
| Outer diameter | 147 mm | 160 mm |
| Replacement chain partno | 14 036 118 | — |
| Size | — | 160 |
| Stainless | No | No |
| Surface | Varnished (Housing) | Blank |
| Temperature max. | 120 °C | 80 °C |
| Temperature min. | -30 °C | -30 °C |
| Total length | 123.5 mm | 122 mm |
| Type | 6 018 | — |
| Wear limit of backlash measured at the circumfer | — | 8 mm |
| With keyway | No | No |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.