Tensioning roller diameter 40mm vs Timing belt pulley AT5 material aluminium 48 teeth for belt width 25mm 36 AT5/48-0
Tensioning roller diameter 40mm and Timing belt pulley AT5 material aluminium 48 teeth for belt width 25mm 36 AT5/48-0 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Timing belt pulley AT5 material aluminium 48 teeth for belt width 25mm 36 AT5/48-0 is €10.70 cheaper ($35.52).
| Criterion |  Tensioning roller diameter 40mm |  Timing belt pulley AT5 material aluminium 48 teeth for belt width 25mm 36 AT5/48-0 |
|---|---|---|
| Price | $47.86 | $35.52cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 170 g | 400 g |
| Belt width | — | 25 mm |
| Distance between tensioning roller and tensionin | 6 mm | — |
| Hub diameter | — | 50 mm |
| Material | Plastic / Steel | Aluminum |
| Max speed | 8000 min-1 | — |
| Max thickness of tensioner lever | 7 mm | — |
| No of teeth | — | 48 |
| Outer diameter | 40 mm | — |
| Outer diameter of pulley | — | 75.17 mm |
| Overhang incl thickness of tensioner lever | 16 mm | — |
| Pilot hole | — | 8 mm |
| Pitch circle diameter | — | 76.39 mm |
| Profile | — | AT5 |
| Suitable tensioner | 14 080 100 | — |
| Surface | Blank | Blank |
| Thread size | M 10 mm | — |
| Tooth width | — | 30 mm |
| Total length | — | 36 mm |
| Type | — | 36 AT5/48-0 |
| Version | — | 2 |
| Width of support surface | 45 mm | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.