Tensioning roller diameter 40mm vs Timing belt pulley HTD 5M material aluminium 60 teeth for belt width 15mm
Tensioning roller diameter 40mm and Timing belt pulley HTD 5M material aluminium 60 teeth for belt width 15mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Tensioning roller diameter 40mm is €2.88 cheaper ($47.86).
| Criterion |  Tensioning roller diameter 40mm |  Timing belt pulley HTD 5M material aluminium 60 teeth for belt width 15mm |
|---|---|---|
| Price | $47.86cheapest | $51.19 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 170 g | 312 g |
| Belt width | — | 15 mm |
| Bore | — | 30 mm |
| Distance between tensioning roller and tensionin | 6 mm | — |
| Hub diameter | — | 50 mm |
| Material | Plastic / Steel | Aluminum |
| Max speed | 8000 min-1 | — |
| Max thickness of tensioner lever | 7 mm | — |
| No of teeth | — | 60 |
| Outer diameter | 40 mm | — |
| Outer diameter pulley | — | 94.35 mm |
| Overhang incl thickness of tensioner lever | 16 mm | — |
| Pilot hole | — | 8 mm |
| Pitch circle diameter | — | 95.49 mm |
| Profile | — | HTD 5M |
| Suitable tensioner | 14 080 100 | — |
| Surface | Blank | Blank |
| Thread size | M 10 mm | — |
| Total length | — | 30 mm |
| Version | — | 2 |
| Width of support surface | 45 mm | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.