Tensioning roller diameter 40mm vs Timing belt pulley HTD-5M 52 teeth for belt width 15mm for taper-bush 1210
Tensioning roller diameter 40mm and Timing belt pulley HTD-5M 52 teeth for belt width 15mm for taper-bush 1210 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Timing belt pulley HTD-5M 52 teeth for belt width 15mm for taper-bush 1210 is €8.72 cheaper ($37.80).
| Criterion |  Tensioning roller diameter 40mm |  Timing belt pulley HTD-5M 52 teeth for belt width 15mm for taper-bush 1210 |
|---|---|---|
| Price | $47.86 | $37.80cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 170 g | 600 kg |
| Belt width | — | 15 mm |
| Bore max. | — | 32 mm |
| Bore min. | — | 10 mm |
| Clamp bushing type | — | 1 210 |
| Distance between tensioning roller and tensionin | 6 mm | — |
| Material | Plastic / Steel | Steel |
| Max speed | 8000 min-1 | — |
| Max thickness of tensioner lever | 7 mm | — |
| No of teeth | — | 52 |
| Outer diameter | 40 mm | — |
| Outer diameter of flanges | — | 87 mm |
| Outer diameter pulley | — | 81.62 mm |
| Overhang incl thickness of tensioner lever | 16 mm | — |
| Pitch circle diameter | — | 82.76 mm |
| Profile | — | HTD 5M (Taper) |
| Suitable tensioner | 14 080 100 | — |
| Surface | Blank | Phosphated |
| Thread size | M 10 mm | — |
| Total length | — | 25 mm |
| Version | — | 10 F |
| Width of support surface | 45 mm | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.