Tensioning roller diameter 40mm vs timing belt pulley HTD-5M, 80 teeth, for belt width 25mm, for taper-bush 1610
Tensioning roller diameter 40mm and timing belt pulley HTD-5M, 80 teeth, for belt width 25mm, for taper-bush 1610 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Tensioning roller diameter 40mm is €25.02 cheaper ($47.86).
| Criterion |  Tensioning roller diameter 40mm |  timing belt pulley HTD-5M, 80 teeth, for belt width 25mm, for taper-bush 1610 |
|---|---|---|
| Price | $47.86cheapest | $76.74 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 170 g | 2.4 kg |
| Belt width | — | 25 mm |
| Bore max. | — | 42 mm |
| Bore min. | — | 12 mm |
| Clamp bushing type | — | 1 610 |
| Distance between tensioning roller and tensionin | 6 mm | — |
| Material | Plastic / Steel | Steel |
| Max speed | 8000 min-1 | — |
| Max thickness of tensioner lever | 7 mm | — |
| No of teeth | — | 80 |
| Outer diameter | 40 mm | — |
| Outer diameter pulley | — | 126.18 mm |
| Overhang incl thickness of tensioner lever | 16 mm | — |
| Pitch circle diameter | — | 127.32 mm |
| Profile | — | HTD 5M (Taper) |
| Suitable tensioner | 14 080 100 | — |
| Surface | Blank | Phosphated |
| Thread size | M 10 mm | — |
| Total length | — | 25.5 mm |
| Version | — | 16 |
| Width of support surface | 45 mm | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.