Tensioning roller diameter 40mm vs Timing belt pulley HTD 8M material steel 48 teeth for belt width 30mm for taper bush 2012
Tensioning roller diameter 40mm and Timing belt pulley HTD 8M material steel 48 teeth for belt width 30mm for taper bush 2012 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Tensioning roller diameter 40mm is €14.06 cheaper ($47.86).
| Criterion |  Tensioning roller diameter 40mm |  Timing belt pulley HTD 8M material steel 48 teeth for belt width 30mm for taper bush 2012 |
|---|---|---|
| Price | $47.86cheapest | $64.09 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 170 g | 1.8 kg |
| Belt width | — | 30 mm |
| Bore max. | — | 50 mm |
| Bore min. | — | 12 mm |
| Clamp bushing type | — | 2 012 |
| Distance between tensioning roller and tensionin | 6 mm | — |
| Material | Plastic / Steel | Steel |
| Max speed | 8000 min-1 | — |
| Max thickness of tensioner lever | 7 mm | — |
| No of teeth | — | 48 |
| Outer diameter | 40 mm | — |
| Outer diameter of flanges | — | 127 mm |
| Outer diameter pulley | — | 120.86 mm |
| Overhang incl thickness of tensioner lever | 16 mm | — |
| Pitch circle diameter | — | 122.23 mm |
| Profile | — | HTD 8M (Taper) |
| Suitable tensioner | 14 080 100 | — |
| Surface | Blank | Phosphated |
| Thread size | M 10 mm | — |
| Total length | — | 32 mm |
| Version | — | 18 F |
| Width of support surface | 45 mm | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.