Tensioning roller diameter 60mm vs Timing belt pulley AT10 material aluminium 19 teeth for belt width 50mm 66 AT10/19-2
Tensioning roller diameter 60mm and Timing belt pulley AT10 material aluminium 19 teeth for belt width 50mm 66 AT10/19-2 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Timing belt pulley AT10 material aluminium 19 teeth for belt width 50mm 66 AT10/19-2 is €34.98 cheaper ($45.53).
| Criterion |  Tensioning roller diameter 60mm |  Timing belt pulley AT10 material aluminium 19 teeth for belt width 50mm 66 AT10/19-2 |
|---|---|---|
| Price | $85.88 | $45.53cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 400 g | 470 g |
| Belt width | — | 50 mm |
| Distance between tensioning roller and tensionin | 8 mm | — |
| Hub diameter | — | 44 mm |
| Material | Plastic / Steel | Aluminum |
| Max speed | 6000 min-1 | — |
| Max thickness of tensioner lever | 8 mm | — |
| No of teeth | — | 19 |
| Outer diameter | 60 mm | — |
| Outer diameter of flanges | — | 66 mm |
| Outer diameter of pulley | — | 58.66 mm |
| Overhang incl thickness of tensioner lever | 17 mm | — |
| Pilot hole | — | 10 mm |
| Pitch circle diameter | — | 60.48 mm |
| Profile | — | AT10 |
| Suitable tensioner | 14 080 300 | — |
| Surface | Blank | Blank |
| Thread size | M 12 mm | — |
| Tooth width | — | 56 mm |
| Total length | — | 66 mm |
| Type | — | 66 AT10/19-2 |
| Version | — | 1 F |
| Width of support surface | 60 mm | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.