Tensioning roller diameter 60mm vs timing belt pulley HTD-5M, 44 teeth, for belt width 25mm, for taper-bush 1210
Tensioning roller diameter 60mm and timing belt pulley HTD-5M, 44 teeth, for belt width 25mm, for taper-bush 1210 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, timing belt pulley HTD-5M, 44 teeth, for belt width 25mm, for taper-bush 1210 is €33.64 cheaper ($47.06).
| Criterion |  Tensioning roller diameter 60mm |  timing belt pulley HTD-5M, 44 teeth, for belt width 25mm, for taper-bush 1210 |
|---|---|---|
| Price | $85.88 | $47.06cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 400 g | 460 g |
| Belt width | — | 25 mm |
| Bore max. | — | 32 mm |
| Bore min. | — | 10 mm |
| Clamp bushing type | — | 1 210 |
| Distance between tensioning roller and tensionin | 8 mm | — |
| Material | Plastic / Steel | Steel |
| Max speed | 6000 min-1 | — |
| Max thickness of tensioner lever | 8 mm | — |
| No of teeth | — | 44 |
| Outer diameter | 60 mm | — |
| Outer diameter of flanges | — | 75 mm |
| Outer diameter pulley | — | 68.88 mm |
| Overhang incl thickness of tensioner lever | 17 mm | — |
| Pitch circle diameter | — | 70.03 mm |
| Profile | — | HTD 5M (Taper) |
| Suitable tensioner | 14 080 300 | — |
| Surface | Blank | Phosphated |
| Thread size | M 12 mm | — |
| Total length | — | 25.5 mm |
| Version | — | 16 F |
| Width of support surface | 60 mm | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.