Tensioning roller diameter 60mm vs Timing belt pulley HTD 8M material steel 30 teeth for belt width 50mm for taper bush 1615
Tensioning roller diameter 60mm and Timing belt pulley HTD 8M material steel 30 teeth for belt width 50mm for taper bush 1615 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Timing belt pulley HTD 8M material steel 30 teeth for belt width 50mm for taper bush 1615 is €35.78 cheaper ($44.54).
| Criterion |  Tensioning roller diameter 60mm |  Timing belt pulley HTD 8M material steel 30 teeth for belt width 50mm for taper bush 1615 |
|---|---|---|
| Price | $85.88 | $44.54cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 400 g | 650 g |
| Belt width | — | 50 mm |
| Bore max. | — | 42 mm |
| Bore min. | — | 12 mm |
| Clamp bushing type | — | 1 615 |
| Distance between tensioning roller and tensionin | 8 mm | — |
| Material | Plastic / Steel | Steel |
| Max speed | 6000 min-1 | — |
| Max thickness of tensioner lever | 8 mm | — |
| No of teeth | — | 30 |
| Outer diameter | 60 mm | — |
| Outer diameter of flanges | — | 83 mm |
| Outer diameter pulley | — | 75.12 mm |
| Overhang incl thickness of tensioner lever | 17 mm | — |
| Pitch circle diameter | — | 76.39 mm |
| Profile | — | HTD 8M (Taper) |
| Suitable tensioner | 14 080 300 | — |
| Surface | Blank | Phosphated |
| Thread size | M 12 mm | — |
| Total length | — | 38 mm |
| Version | — | 16 F |
| Width of support surface | 60 mm | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.