Tensioning roller diameter 80mm vs Timing belt pulley HTD 8M material steel 72 teeth for belt width 20mm
Tensioning roller diameter 80mm and Timing belt pulley HTD 8M material steel 72 teeth for belt width 20mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Timing belt pulley HTD 8M material steel 72 teeth for belt width 20mm is €35.84 cheaper ($113.03).
| Criterion |  Tensioning roller diameter 80mm |  Timing belt pulley HTD 8M material steel 72 teeth for belt width 20mm |
|---|---|---|
| Price | $153.26Least favorable value | $113.03Best value |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 1.15 kgBest value | 3.82 kgLeast favorable value |
| Belt width | — | 20 mm |
| Bore | — | 45 mm |
| Distance between tensioning roller and tensionin | 8 mm | — |
| Hub diameter | — | 80 mm |
| Material | Plastic / Steel | Steel |
| Max speed | 5000 min-1 | — |
| Max thickness of tensioner lever | 10 mm | — |
| No of teeth | — | 72 |
| Outer diameter | 80 mm | — |
| Outer diameter of flanges | — | 192 mm |
| Outer diameter pulley | — | 181.97 mm |
| Overhang incl thickness of tensioner lever | 25 mm | — |
| Pilot hole | — | 14 mm |
| Pitch circle diameter | — | 183.35 mm |
| Profile | — | HTD 8M |
| Suitable tensioner | 14 080 400 | — |
| Surface | Blank | Phosphated |
| Thread size | M 20 mm | — |
| Total length | — | 38 mm |
| Version | — | 2 F |
| Width of support surface | 90 mm | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.