tensioning roller – idler TS nominal size ø20mm x 8mm with separate distance bush for easy assembly vs Timing belt pulley AT10 material aluminium 18 teeth for belt width 16mm 31 AT10/18-2
tensioning roller – idler TS nominal size ø20mm x 8mm with separate distance bush for easy assembly and Timing belt pulley AT10 material aluminium 18 teeth for belt width 16mm 31 AT10/18-2 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, tensioning roller – idler TS nominal size ø20mm x 8mm with separate distance bush for easy assembly is €5.02 cheaper ($15.44).
| Criterion |  tensioning roller – idler TS nominal size ø20mm x 8mm with separate distance bush for easy assembly |  Timing belt pulley AT10 material aluminium 18 teeth for belt width 16mm 31 AT10/18-2 |
|---|---|---|
| Price | $15.44cheapest | $21.24 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 12 g | 167 g |
| Bearing | 1 x 625-2Z | — |
| Belt width | — | 16 mm |
| Designation | TS 20-8 | — |
| Hub diameter | — | 40 mm |
| Material | Aluminum | Aluminum |
| No of teeth | — | 18 |
| Outer diameter of flanges | — | 60 mm |
| Outer diameter of pulley | — | 55.48 mm |
| Part no of suitable bushing | 14 080 505 | — |
| Pilot hole | — | 8 mm |
| Pitch circle diameter | — | 57.3 mm |
| Profile | — | AT10 |
| Surface | Blank | Blank |
| Tooth width | — | 21 mm |
| Total length | — | 31 mm |
| Type | — | 31 AT10/18-2 |
| Version | — | 1 F |
| Weight of bushing | 2.3 g | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.