tensioning roller – idler TS nominal size ø30mm x 13mm with separate distance bush for easy assembly vs Timing belt pulley AT5 material aluminium 30 teeth for belt width 25mm 36 AT5/30-2
tensioning roller – idler TS nominal size ø30mm x 13mm with separate distance bush for easy assembly and Timing belt pulley AT5 material aluminium 30 teeth for belt width 25mm 36 AT5/30-2 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, tensioning roller – idler TS nominal size ø30mm x 13mm with separate distance bush for easy assembly is €2.14 cheaper ($17.73).
| Criterion |  tensioning roller – idler TS nominal size ø30mm x 13mm with separate distance bush for easy assembly |  Timing belt pulley AT5 material aluminium 30 teeth for belt width 25mm 36 AT5/30-2 |
|---|---|---|
| Price | $17.73cheapest | $20.20 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 32 g | 150 g |
| Bearing | 1 x 608-2Z | — |
| Belt width | — | 25 mm |
| Designation | TS 30-13 | — |
| Hub diameter | — | 34 mm |
| Material | Aluminum | Aluminum |
| No of teeth | — | 30 |
| Outer diameter of flanges | — | 51 mm |
| Outer diameter of pulley | — | 46.53 mm |
| Part no of suitable bushing | 14 080 807 | — |
| Pilot hole | — | 8 mm |
| Pitch circle diameter | — | 47.75 mm |
| Profile | — | AT5 |
| Surface | Blank | Blank |
| Tooth width | — | 30 mm |
| Total length | — | 36 mm |
| Type | — | 36 AT5/30-2 |
| Version | — | 1 F |
| Weight of bushing | 4.5 g | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.