tensioning roller – idler TS nominal size ø30mm x 19mm with separate distance bush for easy assembly vs timing belt pulley HTD-5M, 40 teeth, for belt width 25mm, for taper-bush 1108
tensioning roller – idler TS nominal size ø30mm x 19mm with separate distance bush for easy assembly and timing belt pulley HTD-5M, 40 teeth, for belt width 25mm, for taper-bush 1108 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, tensioning roller – idler TS nominal size ø30mm x 19mm with separate distance bush for easy assembly is €17.31 cheaper ($21.00).
| Criterion |  tensioning roller – idler TS nominal size ø30mm x 19mm with separate distance bush for easy assembly |  timing belt pulley HTD-5M, 40 teeth, for belt width 25mm, for taper-bush 1108 |
|---|---|---|
| Price | $21.00cheapest | $40.97 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 58 g | 420 g |
| Bearing | 2 x 608-2Z | — |
| Belt width | — | 25 mm |
| Bore max. | — | 28 mm |
| Bore min. | — | 9 mm |
| Clamp bushing type | — | 1 108 |
| Designation | TS 30-19 | — |
| Material | Aluminum | Steel |
| No of teeth | — | 40 |
| Outer diameter of flanges | — | 71 mm |
| Outer diameter pulley | — | 62.52 mm |
| Part no of suitable bushing | 14 080 807 | — |
| Pitch circle diameter | — | 63.66 mm |
| Profile | — | HTD 5M (Taper) |
| Surface | Blank | Phosphated |
| Total length | — | 22.5 mm |
| Version | — | 16 F |
| Weight of bushing | 4.5 g | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.