tensioning roller – idler TS nominal size ø30mm x 19mm with separate distance bush for easy assembly vs Timing belt pulley H material steel 14 teeth for belt width 075=19.1mm
tensioning roller – idler TS nominal size ø30mm x 19mm with separate distance bush for easy assembly and Timing belt pulley H material steel 14 teeth for belt width 075=19.1mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Timing belt pulley H material steel 14 teeth for belt width 075=19.1mm is €1.82 cheaper ($18.91).
| Criterion |  tensioning roller – idler TS nominal size ø30mm x 19mm with separate distance bush for easy assembly |  Timing belt pulley H material steel 14 teeth for belt width 075=19.1mm |
|---|---|---|
| Price | $21.00 | $18.91cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 58 g | 600 g |
| Bearing | 2 x 608-2Z | — |
| Belt width | — | 19.1 mm |
| Designation | TS 30-19 | — |
| Material | Aluminum | Steel |
| No of teeth | — | 14 |
| Outer diameter of flanges | — | 63 mm |
| Outer diameter pulley | — | 55.22 mm |
| Part no of suitable bushing | 14 080 807 | — |
| Pilot hole | — | 10 mm |
| Profile | — | H |
| Surface | Blank | Phosphated |
| Version | — | 1 F |
| Weight of bushing | 4.5 g | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.