tensioning roller – idler TS nominal size ø30mm x 28mm with separate distance bush for easy assembly vs Timing belt pulley HTD 8M material steel 28 teeth for belt width 50mm for taper bush 1210
tensioning roller – idler TS nominal size ø30mm x 28mm with separate distance bush for easy assembly and Timing belt pulley HTD 8M material steel 28 teeth for belt width 50mm for taper bush 1210 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, tensioning roller – idler TS nominal size ø30mm x 28mm with separate distance bush for easy assembly is €16.13 cheaper ($22.80).
| Criterion |  tensioning roller – idler TS nominal size ø30mm x 28mm with separate distance bush for easy assembly |  Timing belt pulley HTD 8M material steel 28 teeth for belt width 50mm for taper bush 1210 |
|---|---|---|
| Price | $22.80cheapest | $41.41 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 64 g | 600 g |
| Bearing | 2 x 608-2Z | — |
| Belt width | — | 50 mm |
| Bore max. | — | 32 mm |
| Bore min. | — | 10 mm |
| Clamp bushing type | — | 1 210 |
| Designation | TS 30-28 | — |
| Material | Aluminum | Steel |
| No of teeth | — | 28 |
| Outer diameter of flanges | — | 75 mm |
| Outer diameter pulley | — | 70.08 mm |
| Part no of suitable bushing | 14 080 807 | — |
| Pitch circle diameter | — | 71.3 mm |
| Profile | — | HTD 8M (Taper) |
| Surface | Blank | Phosphated |
| Total length | — | 25 mm |
| Version | — | 16 F |
| Weight of bushing | 4.5 g | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.