tensioning roller – idler TS nominal size ø40mm x 14mm with separate distance bush for easy assembly vs Timing belt pulley T10 material aluminium 20 teeth for belt width 50mm 66 T10/20-2
tensioning roller – idler TS nominal size ø40mm x 14mm with separate distance bush for easy assembly and Timing belt pulley T10 material aluminium 20 teeth for belt width 50mm 66 T10/20-2 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, tensioning roller – idler TS nominal size ø40mm x 14mm with separate distance bush for easy assembly is €15.05 cheaper ($28.89).
| Criterion |  tensioning roller – idler TS nominal size ø40mm x 14mm with separate distance bush for easy assembly |  Timing belt pulley T10 material aluminium 20 teeth for belt width 50mm 66 T10/20-2 |
|---|---|---|
| Price | $28.89cheapest | $46.25 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 74 g | 520 g |
| Bearing | 1 x 6200-2Z | — |
| Belt width | — | 50 mm |
| Designation | TS 40-14 | — |
| Hub diameter | — | 46 mm |
| Material | Aluminum | Aluminum |
| No of teeth | — | 20 |
| Outer diameter of flanges | — | 66 mm |
| Outer diameter of pulley | — | 61.8 mm |
| Part no of suitable bushing | 14 081 009 | — |
| Pilot hole | — | 12 mm |
| Pitch circle diameter | — | 63.66 mm |
| Profile | — | T10 |
| Surface | Blank | Blank |
| Tooth width | — | 56 mm |
| Total length | — | 66 mm |
| Type | — | 66 T10/20-2 |
| Version | — | 1 F |
| Weight of bushing | 10.5 g | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.