tensioning roller – idler TS nominal size ø40mm x 14mm with separate distance bush for easy assembly vs Timing belt pulley HTD 3M material aluminium 90 teeth for belt width 9 mm
tensioning roller – idler TS nominal size ø40mm x 14mm with separate distance bush for easy assembly and Timing belt pulley HTD 3M material aluminium 90 teeth for belt width 9 mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, tensioning roller – idler TS nominal size ø40mm x 14mm with separate distance bush for easy assembly is €18.86 cheaper ($28.89).
| Criterion |  tensioning roller – idler TS nominal size ø40mm x 14mm with separate distance bush for easy assembly |  Timing belt pulley HTD 3M material aluminium 90 teeth for belt width 9 mm |
|---|---|---|
| Price | $28.89cheapest | $50.65 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 74 g | 259 g |
| Bearing | 1 x 6200-2Z | — |
| Belt width | — | 9 mm |
| Bore | — | 40 mm |
| Designation | TS 40-14 | — |
| Hub diameter | — | 55 mm |
| Material | Aluminum | Aluminum |
| No of teeth | — | 90 |
| Outer diameter pulley | — | 85.19 mm |
| Part no of suitable bushing | 14 081 009 | — |
| Pilot hole | — | 8 mm |
| Pitch circle diameter | — | 85.94 mm |
| Profile | — | HTD 3M |
| Surface | Blank | Blank |
| Total length | — | 22.2 mm |
| Version | — | 2 |
| Weight of bushing | 10.5 g | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.